Downloads:
cnl35
CNL35: universal input, over 10 types of inputs (temperature and process)
CNL35/F: fixed-frequency input
CNL35/R: relay option
CNL35/S2: second output option
CNL35/T: reduced response time
CNL35/SP: 16-bit output
Fully configurable
Fully isolated
The CNL35 is a fully configurable, general-purpose digital transmitter for temperature and process inputs
Downloads:
cnl34dhig
Temperature, voltage, and current inputs: PT100, thermocouple, Volts (up to 5000 Vdc), mV (shunt), mA…
Very high galvanic isolation with a dielectric strength of 10 kV AC / 15 kV DC (continuous)
Fully configurable via serial connection
Universal AC/DC power supply
The CNL34DHig is a transmitter designed for measurement applications on equipment that may be exposed to high voltages (power distribution, railways, transformers, motors, alternators, etc.) and requires maximum safety.
Downloads:
cnl25igd
Temperature and process inputs
, PT100 platinum sensor (2-, 3-, or 4-wire configuration), thermocouple,
, mV, mA, potentiometer
2-wire output: powered by the 4–20 mA loop
Galvanic isolation: input/output
Fully configurable: USB connection, HART protocol, FDT-certified HART DTM drivers
SIL2 compliance according to IEC 61508
Compact width: 18 mm
The CNL25igD is an isolated transmitter for DIN rail mounting, powered by the 4–20 mA loop
, designed for measuring temperature or process signals. The CNL25igDH incorporates the HART communication protocol
, is FDT-certified, and is available in SIL2 compliance according to IEC 61508.
Downloads:
cnl25ig
Process and temperature inputs
: voltage (V, mV), current (mA), potentiometer (
), thermocouple, PT100
2-wire technique powered by the 4-20mA loop
Galvanic isolation
Fully configurable
Compact DIN rail housing
The CNL25ig is a programmable, isolated DIN rail-mounted transmitter, powered by the 4…20mA loop
and featuring a very compact design for applications with limited space.
Downloads:
cnl25d
Temperature input: PT100, thermocouple
Compact design: 17 mm
Plug-in connectors
2-wire technology: powered by the 4-20 mA loop
Fully configurable: USB connection
The CNL25 is an entry-level, DIN-rail-mountable, 4–20 mA loop-powered programmable transmitter
that supports all temperature measurement methods (PT100 and thermocouples)
across all measurement ranges with a single product.
Downloads:
cnl23l
Process inputs (Volt, mA, sensor power supply, potentiometer)
2 isolated analog outputs
CNL23L-H:
HART transparency option
Fully configurable
Simulation mode (RS-232) loop calibration
Low response time: 55 ms
Universal power supply: 20–265 V AC/DC
The CNL 23L is a process input transmitter featuring two isolated analog outputs
that can be configured independently (loop isolator, signal duplicator, load boost, etc.)
Downloads:
cnl23
Process inputs: Volts, mA, potentiometer
Bipolar inputs and outputs (+/-)
Fully configurable (RS-232)
2 analog outputs as standard
Fast response time: 55 ms
The CNL 23 is a digital-to-analog converter for process inputs. Its quick reconfiguration without the need for adjustment makes it a cost-effective replacement for an analog converter.
Downloads:
cnl20si
All process and temperature inputs: Volts, mV, mA, analog sensor, potentiometer; thermocouple, PT100
CNLB20SI: DIN rail mounting
CNLR20SI: 19″ rack mounting »
Fully configurable
Fully isolated 2500V
RS485 Modbus connection
The CNL20SI is a programmable converter designed for use with sensors in Ex-
s. A single model covers all measurement needs in explosive environments.
Downloads:
cna105
18 parallel digital inputs (16 bits + sign + enable)
Input in BCD, Gray, or binary code
Analog Output
: 0–4–20 mA, 0–10 V (16-bit resolution)
CNA105/R Relay Output Option: 2 programmable thresholds
Application:
Interface for encoders with parallel outputs
The CNA105 is a digital-to-analog converter that converts the position
of an input encoder into an analog signal; the display allows for quick diagnosis of proper operation.
The product configuration (encoder resolution, encoding type: BCD, GRAY, BINARY, polarity, etc.)
allows it to meet the needs of most applications.
The relay outputs enable local limit switch or alarm control.
Downloads:
cml70
4 isolated analog inputs
– individual configuration for each input.
– 1 alarm threshold per input.
CML70t: thermocouples, 2-wire and 3-wire Pt100, mV, resistance.
CML70pt4: thermocouples, 4-wire Pt100
CML70p: 0…20 mA; 4…20 mA and 0..1..5..10 V (process)
CML70B: 0…24 V, 48 V…127 V…150 V DC (battery monitoring, power supply)
Communication:
Modbus RTU
Modbus-TCP (Ethernet) 6 simultaneous connections
Embedded web server
SNMP
Application:
Temperature monitoring: motor, transformer
Voltage monitoring: battery, power supply,
Monitoring relays: temperature, voltage, current.
The CML70 is a compact four-channel data acquisition unit designed for applications requiring high precision and functional safety
; the unit’s full isolation ensures that each measurement is completely independent.