Our products

Threshold relay – Protective relay

Select a category

ALTERNATING CURRENT DETECTOR

Downloads:

Manual
Additional file 1
Additional file 2
Supplementary file 3
Supplementary file 4
Supplementary file 5
Supplementary file 6
Supplementary file 7
Supplementary file 8
Direct link 1
Direct link 2

Manual
Additional file 1
Additional file 2
Supplementary file 3
Supplementary file 4
Supplementary file 5
Supplementary file 6
Supplementary file 7
Supplementary file 8
Direct link 1
Direct link 2

dil25ca

Electronics, AC/DC Current Relays, Threshold Relays - Protection Relays

Non-intrusive analog current detection
Detection threshold: 0.2 Aac to 500 Aac, predefined by the sensor

Tios-type remote current sensor (open type), passage diameter: 8, 12, 17, 24, and 36 mm
The detector threshold is preset in the sensor; no adjustment is necessary

Solid-state relay output: normally open contact, rated for 60 V and 0.5 A, with a delay time of 0.025 to 60 seconds

Application
Commissioning detection
Overcurrent detection, test bench

DIL25CA: 24 VDC power supply
DIL25CA-A: self-powered
DIN rail mounting

The DIL25CA is a threshold relay for alternating current, providing a cost-effective solution for detecting overcurrent or for commissioning equipment
. Its open-contact sensor allows for safe,
-based operation without modifying the existing electrical circuit; the sensor determines the detection threshold.
The potential-free solid-state relay output allows for direct control of an indicator light, a relay
, or a PLC input.

PHASE FAILURE DETECTOR,

Downloads:

Manual
Additional file 1
Additional file 2
Supplementary file 3
Supplementary file 4
Supplementary file 5
Supplementary file 6
Supplementary file 7
Supplementary file 8
Direct link 1
Direct link 2

Manual
Additional file 1
Additional file 2
Supplementary file 3
Supplementary file 4
Supplementary file 5
Supplementary file 6
Supplementary file 7
Supplementary file 8
Direct link 1
Direct link 2

dap23

Electronics, Presence and Phase-Sequence Relays, Threshold Relays - Protection Relays

Phase detection for three-phase, two-phase, or single-phase systems
Mains frequency: 50 Hz, 60 Hz, and 400 Hz (40 Hz…500 Hz)
Prevents startup in the event of a missing phase.
Protects sensitive equipment from power supply faults.
Use of the neutral wire is optional in three-phase systems

Phase-by-phase status relay output
Contactor control, PLC input
Connecting the relays in series provides a summary relay output