Our products

• All types of protection curves: constant-time, inverse-time, very inverse-time, or extremely inverse-time…
• 1, 2, 3, or 4 relay outputs
• Measurement display (10,000 points) with front-panel programming
• 1 or 2 isolated analog outputs with optional measurement converter function
• Universal power supply
• SIL2 option according to IEC 61508

The RPS23 is a universal thermal protection relay for direct current; when used with a standard shunt
(available as an option), it can measure any current. All protection coefficients
are freely adjustable by the user, allowing it to accommodate all types of loads. Optionally, the RPS23
can be equipped with one or two isolated analog outputs to perform the measurement converter function.

Charge and discharge current control relay
• Bidirectional battery protection Charge current control Discharge current control
• 3 relay outputs
• Measurement display (10,000 counts) with front-panel programming
• Isolated analog output (measurement feedback function)
• Plug-in connectors
• Universal power supply
The RPB45S is a universal battery protection relay; when used with a shunt, it can measure
any current. The protection thresholds and time delays are freely adjustable for each
current direction (charge and discharge), allowing it to cover all types of batteries.
The RPB45S is equipped with an isolated analog output for transmitting the current measurement.

• 3 current inputs up to 100A Three-phase or 3 single-phase circuits
• Open-core current transformer 333mV output
• 3 relay outputs Monitoring of each phase
• Front panel LCD: 2 lines of 16 characters Display of the three currents; threshold adjustment
• Can be used as 3 isolated single-phase relays

The RCL105 is a three-phase current measurement relay designed to monitor and protect unbalanced loads
by measuring the current in each phase.
The LCD display allows for precise threshold adjustment and quick current monitoring.

• DC or DC+AC control, range from +/- 1A to +/-125 A DC
• 1 changeover relay output; alarm configurable via front panel (threshold, delay, hysteresis)
• 1000-count LED current display
• Applications: solar systems, batteries, motor monitoring

Description:
The DSL35LCC is primarily designed for monitoring DC current (
). With the TRMS option, the product can also be used for measuring complex AC+DC currents.

Current control relays up to 500 A rms at 50 Hz / 60 Hz / 400 Hz
Effective measurement for all types of signals: PWM; Phase angle modulation, Pulse trains, signals with high harmonic content
• DSL35LCA peak detection
• Measurement input via split-core transformer
• 1000-point LED measurement display
• 2 configurable thresholds on the front panel: Threshold, delay, hysteresis
• 2 10A changeover relay outputs
• DIN rail mounting
The DSL35LCA is a compact current measurement relay with thresholds, providing a cost-effective solution
for monitoring or protection issues.
The 3-digit LED display allows for precise threshold adjustment and quick measurement verification.

• Non-intrusive current detection Detection threshold: 0.1A; current rating > 200A
• Remote current sensor (open-loop) • 1 output: 24Vdc, 200mA
Open-loop current sensor type: Tio d8 mA
• DIN rail mounting
• Application
Non-intrusive detection of machine or system startup, Radiology Equipment
• Universal power supply 20–265 V AC/DC

The DIL36 is a fixed-threshold relay for alternating current, providing a cost-effective solution
for detecting when equipment is turned on or off. Its normally closed sensor allows for safe operation
without modifying the existing electrical circuit; the output can be used to directly control
indicator lights or a relay.

• Non-intrusive analog current detection
Detection threshold: 0.2 Aac to 500 Aac, predefined by the sensor

• Tios-type remote current sensor (open type), passage diameter: 8, 12, 17, 24, and 36 mm
The detector threshold is preset in the sensor; no adjustment is necessary

• Solid-state relay output: normally open contact, rated for 60 V and 0.5 A, with a delay time of 0.025 to 60 seconds

• Application
Commissioning detection
Overcurrent detection, test bench

• DIL25CA: 24 VDC power supply
• DIL25CA-A: self-powered
• DIN rail mounting

The DIL25CA is a threshold relay for alternating current, providing a cost-effective solution for detecting overcurrent or for commissioning equipment
. Its open-contact sensor allows for safe,
-based operation without modifying the existing electrical circuit; the sensor determines the detection threshold.
The potential-free solid-state relay output allows for direct control of an indicator light, a relay
, or a PLC input.