Non-intrusive analog current detection
Detection threshold: 0.2 Aac to 500 Aac, predefined by the sensor
Tios-type remote current sensor (open type), passage diameter: 8, 12, 17, 24, and 36 mm
The detector threshold is preset in the sensor; no adjustment is necessary
Solid-state relay output: normally open contact, rated for 60 V and 0.5 A, with a delay time of 0.025 to 60 seconds
Application
Commissioning detection
Overcurrent detection, test bench
DIL25CA: 24 VDC power supply
DIL25CA-A: self-powered
DIN rail mounting
The DIL25CA is a threshold relay for alternating current, providing a cost-effective solution for detecting overcurrent or for commissioning equipment
. Its open-contact sensor allows for safe,
-based operation without modifying the existing electrical circuit; the sensor determines the detection threshold.
The potential-free solid-state relay output allows for direct control of an indicator light, a relay
, or a PLC input.