A series of sensors characterized by a very short response time, easy and quick installation, and high flexibility depending on the surface temperature to be measured. • SPS Flexible surface probe PT 100 class B sensing element encapsulated in silicone elastomer, Teflon element support (L: 25 mm, W: 10 mm, thickness: 1.5 mm), 4-conductor Teflon cable, 2 m long, minimum bending radius of 25 mm in the longitudinal direction only. Do not use in oils or solvents. Operating temperature: –50 to +200 °C. Response time: 70 milliseconds at 63.2% of the reading when immersed in water flowing at 1 m/s. • SPF FASTON terminal probe • TCF FASTON terminal thermocouple Sensing element mounted in a FASTON terminal, inner mounting diameter 4 to 16 mm (other diameters available upon request), 3-conductor cable with Teflon/Teflon insulation, length to be specified. Operating temperature: –50 °C to +200 °C. Sensing element: Pt 100 Ohms, thermocouple, … Available in ATEX-certified versions for gas and dust Applications: machine surfaces, heat sinks, … • SPFLEX Probe with clamp • TCFLEX Thermocouple with clamp 316L stainless steel protective sheath, Ø 5 mm, tapered at the tip for optimal contact with the surface, welded or unsoldered to a screw-type “Serflex” stainless steel clamp, axial or radial mounting. 3-conductor cable with Teflon/Teflon insulation, length to be specified, clamp diameter as required. Operating temperature: –50 °C to +200 °C. Sensing element: Pt 100 Ohms, thermocouple. Available in ATEX-certified versions for gas and dust Applications: pipe temperature measurement (e.g., heating)
